Urethane Cement Flooring in Olympia Heights FL - A floor built to take a beating
Coating keeps chipping and peeling under carts, tools and heavy use? We put down a urethane cement floor made to take hard knocks.
- Fully licensed and insured.
- Free estimates at your property.
- We reply within 1 business day.
What does urethane cement flooring involve, from slab prep to cure time?
Urethane cement flooring is a thick layer of urethane binder mixed with Portland cement and graded aggregates. Westmark Epoxy Floors of Olympia Heights puts it down in Olympia Heights and the cities around it in Miami-Dade County, on floors that take impact, carts and heavy use. The job usually starts with grinding the slab and repairing cracks, and the floor needs time to cure before the space goes back into full use.
Most people who call me about urethane cement have a floor that's already let them down. The price turns on the size of the floor, how much grinding and repair the slab needs, how thick a system your traffic calls for and the topcoat you pick. The schedule turns on the prep, the moisture in your slab, the humidity on install day and how long the space has to stay out of full use while it cures. I'll give you your own figure in a written estimate once I've seen the slab. Before we schedule, we find out whether the county or your city covers your property, and if the job needs a permit, we apply for it as the licensed contractor.
How do you know your concrete floor needs something tougher?
Chips where things hit
Bare concrete shows through the coating where carts roll, tools drop or racks get dragged. That usually means the coating is too thin for the impact the floor takes, and the longer it goes, the more the chips spread and the more grinding the next floor needs.
Coating lifting in patches
Bubbles, soft spots or whole sheets of coating peel up, sometimes with a white powder underneath. That often points to moisture coming up through the slab, and every month it waits, more of the coating lets go until stripping the whole floor is the only fix.
Worn, dusty traffic lanes
Bare concrete dusts and wears down in the paths people and equipment use most. Left alone, the surface keeps breaking down, and a slab that's rough and low in spots costs more to prep later.
Other concrete floors to consider
Polished Concrete Flooring
A good pick when your floor sees steady foot traffic rather than heavy impact, since grinding and polishing the slab itself costs less than a full urethane system.
Stained Concrete Flooring
Worth a look if color and character matter more to you than toughness, because stain soaks into the concrete and works under a clear sealer on lighter-use floors.
How we install urethane cement flooring
I recommend urethane cement for floors that take a beating, where a floor that lasts longer can matter more than epoxy's lower starting price. I look at the slab first. Then our installers grind it to open the surface so the urethane has something to bond to, fill the cracks and repair the damaged spots, and lay the urethane cement in a thick layer that takes impact well. If you want a topcoat, it goes on last, and we plan the cure with you so the space doesn't go back into full use before the floor is ready.
Not every floor needs this much. When the traffic is lighter, polished concrete flooring is often the better buy, and if you mainly want color, stained concrete flooring gets you there for less. I'd rather point you to one of those than sell you more floor than you need.
Self-leveling slurry
Poured and spread into a smooth, even surface, it suits floors with carts and steady foot traffic where you want something easy to clean. It's the thinner of the systems we lay.
Heavy-duty trowel-down
Troweled on thicker for floors that take dropped tools, heavy equipment and hard knocks. It costs more in material and labor, but it's the one I'd pick for the roughest use.
Slip-resistant textured finish
Aggregate broadcast into the surface gives you more grip where floors get wet or greasy. The trade-off is a rougher surface that takes a little more scrubbing to keep clean.
Get a written estimate for your urethane cement floor
Send the form and we reply within 1 business day to set a time for me to see your slab. The estimate is free, with no pressure and no obligation, or call (786) 408-1023.
Call (786) 408-1023Why Olympia Heights property owners call Westmark Epoxy Floors for urethane cement
I see your slab myself
I come out to look at the job and write the estimate myself, and our installers do the prep and the coating. The person who sized up your slab is the one who prices it, so nothing gets lost between a salesperson and the crew.
Prep comes first since 2017
I started in flooring sales and kept watching coated floors fail because somebody rushed the prep, so I learned grinding and coating on job sites and started this business in 2017. Nine years on, the prep is still the part I care about most.
Licensed and insured in Miami-Dade
We're fully licensed and insured. Miami-Dade County licenses the contractors who work here through its Contractor Licensing Section, which is worth knowing before you let any crew grind your slab.
Straight answers, satisfaction guaranteed
Satisfaction guaranteed on every job. If your slab isn't ready or a cheaper floor fits how you use the space, I'll tell you that before you spend anything.
On this floor, the prep and the cure decide how long it lasts, so tell me about your floor and I'll come take a look.
What happens after you call about urethane cement flooring in Olympia Heights?
Call or send the form
Call (786) 408-1023 or send the form, and we set a time for me to come out. Mornings, evenings and weekends all work.
I look at the slab
I check the concrete, its cracks and any old coating, and ask how you use the space, because that decides which system fits. You get a written estimate with the prep, the system and the price on it.
We set the date and prep
Once you say yes, we schedule the work, and our installers grind and repair the slab before any urethane cement goes down. That part gets the most care, because it's what the new floor holds onto.
Walk the floor together
I walk the finished floor with you before we pack up. We go over when the space can take light foot traffic and when it's ready for full use, so nothing heavy goes back on it too soon.
Common questions
Is urethane cement flooring worth it over epoxy in Olympia Heights?
On a floor that takes a beating, it often is, because urethane cement usually lasts longer there even though epoxy costs less upfront. One maker says it often costs less to own in demanding settings since it needs fewer repairs over the life of the floor. If your floor sees light use, I'll tell you epoxy floor coatings are the better buy.
How long does urethane cement take to cure before I can walk on it?
One maker's self-leveling urethane cement takes light foot traffic after 12 hours and reaches full cure after 7 days, at 77°F and 50% relative humidity. Other products and other conditions can run differently, so we keep the space out of full use until the floor has cured and tell you when it's ready.
Can urethane cement go over a concrete slab that still has moisture in it?
In many cases it can, because one maker calls urethane cement highly tolerant of moisture in the concrete beneath it. That lets it go over slabs that still give off some moisture vapor. I check your slab before I recommend it, since that decides the prep.
Who handles permits for my property in Miami-Dade County?
Your property's folio number decides it. Miami-Dade County handles buildings in unincorporated areas whose folio numbers begin with "30", and each city in the county has its own building official for permits and inspections, so you can check your address with the county to see which office covers you. On county-handled property, the county's no-permit list includes resurfacing a floor, and surface treatment of existing concrete falls under its Concrete Finish Contractor certificate. We confirm what applies to your job before we schedule.
Will a urethane cement floor change color over time?
It can, because one maker says its urethane cement floor isn't color stable unless a UV-resistant topcoat goes over it. If you want the color to hold, we can plan that topcoat into the job from the start.
How much does urethane cement flooring cost in Olympia Heights?
I can't give you an honest number until I've seen the slab, because much of the cost sits in what the concrete needs before the urethane goes down. An old coating to strip, wide cracks or a floor that needs the thicker trowel-down system will raise it, while a sound, bare slab keeps it lower. Your written estimate spells out the figure.
Request your urethane cement floor estimate
Have your property folio number, the floor's rough size and how the space gets used ready, so we can sort out the right office and the right system on the first call.