Metallic Epoxy Flooring in Olympia Heights FL - a one-of-a-kind floor on a sound slab
Tired of a gray, stained slab? We fix the concrete, help you pick a base color and show you a sample before the full floor.
- Fully licensed and insured.
- Free estimates at your property.
- We reply within 1 business day.
What does a metallic epoxy floor involve, from slab repair to the final coat?
Metallic epoxy flooring is a decorative coating that gives your concrete a swirled, three-dimensional metallic look. In Olympia Heights it almost always starts with slab work, grinding off old coatings, filling cracks and smoothing rough spots, so the finish has a smooth base to sit on.
Most people who call about a metallic floor have a living room, garage or shop with plain, stained or patched concrete, and they want something that looks finished without laying tile. The price moves mostly with the size of the room and how much the slab needs, because grinding off old paint or glue and repairing cracks takes time a clean slab doesn't, and a moisture problem adds more. The schedule turns on that same prep, on when you sign off on a sample and on any permit your address needs. The written estimate I leave you gives the number for your floor.
What signs say your concrete floor needs more than a cleanup?
Old coating peeling up
Flaking paint or a store-bought epoxy kit lifting at the edges usually means the prep was rushed or moisture got under it. All of it has to come off down to clean concrete, and the longer it peels, the more loose pieces get tracked through the house.
Cracks and uneven patches
Hairline cracks, old patches and pitted spots look minor on bare concrete, but they usually keep growing as the slab moves. They're cheaper to fill now than after they've widened, and any coating needs them repaired first.
White powder or damp spots
A chalky white film or patches that stay darker than the rest of the floor usually mean moisture is moving up through the slab. A coating put over that can let go later, so it needs a look before any color goes down.
Other floors to compare with metallic
Urethane Cement Flooring
If the room sees heat, hot water or heavy spills, like a kitchen or a shop, urethane cement usually handles that abuse better than a decorative metallic coat.
Polished Concrete Flooring
If your slab is already in good shape and you want a low-key look, polishing the concrete itself can cost less than building up a metallic system.
How we install metallic epoxy flooring
A metallic floor shows every flaw, so the first work is on the slab, not the color. Our installers grind the concrete, fill the cracks and patch the low spots until the surface is smooth, because anything left under the coating tends to show through it. Then I help you pick a base color, since it changes the whole look, and I make a sample so you can see the effect before we do the full floor. Once you like what you see, the crew puts the floor down in layers and cleans up when it's done.
Metallic isn't the right floor for every room, and I'll tell you when it isn't. For a kitchen, a workshop or anywhere hot water and harsh spills are part of the day, urethane cement flooring is usually the tougher choice. If your concrete is sound and you'd like a quieter finish for less, polished concrete flooring works with the slab you already have.
Soft, blended color
This suits living rooms, bedrooms and offices where you want movement without it taking over the room. Close shades over a mid-tone base keep the effect calm.
Bold swirls and veining
This suits a game room, a showroom or a garage you want people to notice. Higher-contrast colors give deeper waves and a more marbled look.
Grip added to the topcoat
This suits a garage, a laundry room or a back entry where the floor gets wet. A fine grit in the clear top makes it less slick, with a little less shine.
Get a written price for your metallic epoxy floor
Send the form and we'll reply within one business day to set up a free visit, no obligation. I'll look at your slab and leave a written estimate. Calling (786) 408-1023 works too.
Call (786) 408-1023Why Olympia Heights homeowners call us for metallic epoxy
Prep first since 2017
I started on the sales side of flooring and kept seeing coated floors fail because the prep was rushed, so I learned grinding and coating on job sites and opened this business in 2017. Nine years later, the slab work is still the part I watch closest.
The owner writes your estimate
I come out myself to look at the slab and write the estimate, and our installers do the prep and the coating. I'd rather tell you your slab isn't ready, or that a cheaper floor suits you better, than sell you one that won't hold up.
Fully licensed and insured
We're fully licensed and insured. Grinding, dust and coatings inside your home are exactly the kind of work you want a covered crew doing.
We know the slabs around here
We're based in Olympia Heights and work across the cities around it in Miami-Dade County, from Westchester to Kendall. Plenty of homes here sit on slabs carrying years of tile glue, paint and patches, so we plan for real prep from the first visit.
On a metallic floor, the slab underneath decides how the finish turns out. Book your estimate and I'll tell you straight whether yours is ready.
What happens after you call about a metallic floor in Olympia Heights?
Call or send the form
Reach us at (786) 408-1023 or through the form, and we'll set a time for me to come see the floor. Our hours run into the evening, so you can call after work.
I look at your slab
I check the concrete in person, ask how you use the room and leave you a written estimate. It lays out the prep your slab needs, the work and the price, and nothing gets scheduled until you say yes.
We set the date and prep
Once you say yes, we book the job, and our installers start with the grinding and repairs before your sample and the coats go down. If your address needs a permit, that's taken care of before work starts.
Walk the finished floor together
Before we pack up, I walk the floor with you so you see it with me before we leave. Satisfaction guaranteed on every job.
Common questions
How much does metallic epoxy flooring cost in Olympia Heights?
I give you a number only after I've seen your slab, because the concrete underneath moves the price more than the metallic coat does. A clean, sound slab costs the least, while old coatings to strip, wide cracks or a moisture problem add work, and extra colors or a grit topcoat add a bit more.
What will my metallic epoxy floor look like?
It will have waves, swirls and ripples with real depth, and no two floors come out the same. These floors are usually built in layers, a primer, a colored epoxy base, the metallic epoxy and a clear urethane top, and the metallic layer is see-through, so your base color shapes the result. A light base gives a lighter floor and a dark base deepens the metallic look, which is why I make you a sample first.
How do I know if my slab is too wet for metallic epoxy?
A moisture test tells you, and coating makers generally require one first, because too much moisture in a slab can make the coating come loose and break down. The test only shows the slab on that day and in the spots tested, so it belongs early in the plan. One maker also requires a moisture barrier under slabs poured on the ground, since seasonal changes in ground moisture can push vapor up through the slab no matter what earlier tests showed.
Do I need a permit for a metallic epoxy floor in Olympia Heights?
Possibly, because Miami-Dade County's list of floor surfaces that need no building permit names carpet, tile, brick and wood, not metallic epoxy. A newer Florida law lets some small home projects valued under $7,500 go through a simpler process without a building permit, but only when they meet the county's listed criteria, and properties partly or entirely in a flood hazard area don't qualify, so the county points owners to FEMA's Flood Map Service Center to search their address. Before we schedule, we find out whether the county or your city covers your property, and if a permit is needed, we apply as the licensed contractor and handle the paperwork and inspections.
Who licenses flooring contractors in Miami-Dade County?
The county does, through its contractor licensing section, which licenses contractors and tradesmen working in Miami-Dade. Ask any installer you're considering which license they work under before you sign anything.
What is the best way to choose a metallic epoxy installer?
Ask to see a sample of your colors before the full floor goes down. One coating maker calls metallic systems extremely difficult to install, with variables outside the installer's control, and strongly recommends mock-ups to check how the floor looks and performs. It's also fair to ask which layers your floor gets and whether the crew has read the maker's technical and safety data sheets.
Start your metallic floor with a slab check
When you call (786) 408-1023 or send the form, tell us the room size, the colors you like and whether the slab sits on the ground, so I come out ready to talk about your floor.